Adjust-A-Wall? Curtain Wall Partition Systems provides protection and partitioning and easily rolls out of the way when not required. Workers painting, sanding, washing, welding, grinding, cutting, or assembling can work side-by-side to minimize contaminants from spreading into other areas.
Custom systems to fit your specific application are readily available and can be supplied with clear vinyl windows for general shop and warehouse partitioning, or with tinted transparent vinyl for welding workstations. Select the height, width, and system configuration that best fit your needs. Widely used for wash bays, departmental workstations, storage areas, assembly lines, paint, primer, and prep areas, welding and grinding booths, and test labs.
How to order custom Adjust-A-Wall? Systems:
NOTE: Minimum 2" shall be deducted from curtain height to allow for the curtain to move?freely. Normal tolerance is +/- 1". 10% is added to curtain width for proper drape.?
Adjust-A-Wall is easy to install, and Steiner’s technical team will determine and provide all the?necessary connectors, track and hardware based on the installation mounting method and?configuration chosen.?
The most popular method of erecting Adjust-A-Wall? Partition?Systems is suspension mount. Track is hung from overhead (beams?or trusses) supported from chain, cable, threaded rod or angle?iron (not provided). Upon installation of chain or other supports,?the appropriate track connectors (chain or threaded rod type) are?attached to track at approximate 4' – 8' intervals to suspend the?track. Once track is suspended in place at height desired, roller-hooks?are inserted into track slot (1 roller per foot of curtain). Close track?slot by installing end stop at each end of track. Hang the partition by?inserting hooks through brass grommets along top edge of curtain.?Curtains should reach approximately 1" or more above floor for?smooth and fluid movement.?
Threaded Rod Adapter
?With this method of installation, the track is attached directly to the?ceiling by mounting brackets flush to the ceiling, floor joists or to the?bottom of a beam. ?
?For the Wall Mount installation method, track mounts are attached to?walls above openings, or you can use wall end brackets to brace or?stabilize the track.?
Track Splice (Up)
Wall End (Down)
Wall End (Up)
Track Splice (Down)
To install tracks using the Floor Mount installation method, you will need?to erect custom-height columns attached to our heavy-duty 12" square?floor bases, and install the appropriate track mounts to the top of each?coumns..?
44306 - 6', 44307 - 7',44308 - 8', 44309 - 9',44310 - 10'
12" Square Base
Additional accessories and track pieces are available to completely customize your installation.
2-Wheel Nylon Roller-hooks
Roller End Stop
44003 - 3', 44004 - 4',44005 - 5', 44006 - 6',44007 - 7', 44008 - 8',44009 - 9', 44010 - 10',44011 -11', 44012 - 12'
Custom partitions can be ordered with hardware, or replacement curtains only.